HIMS Braille Sense U2 User Manual page 269

4) By pressing "Space-1" or "Space-4", move to "Go to percent"
menu.
5) Press "Enter". Or without calling up the menu, press "Backspace-p
(dots 1-2-3-4)" while playing or in a pause status of file.
6) Then it will find the edit box asking "Go to percent: XX".
7) Enter the percent that you want to move to. Enter the number
range from 0 to 99.
8) Press "Enter".
9) It will move to the point of the percent has been entered.
9.3.4.6 Set Start Point
A B repeat mode allows you to play a specific part of an audio file as
many times as you wish. This can be useful when learning a new
language, and you need to hear the same information in a file over and
over again.
A B repeat mode requires setting start and end point.
To execute set start point, follow these steps:
1) To set start point, press the "Enter-p (dots 1-2-3-4)" at the point
where you want to start the section while playing.
2) Also, press "Space-m (dots 1-3-4)" or "F2" and move to "Position"
by pressing "Space-4". Press "Enter" on "Position." Move to "Set
start point" by pressing "Space-4" and press "Enter".
3) You will hear "Set start point" and the file will keep playing.
4) To set end point, press "Enter-p (dots 1-2-3-4)" at the point where
you want to end the section.
Also you can execute A B repeat mode by using "Record button"
while playing.
1) Press "Record button" at the point where you want to start the
section while playing.
2) To set end point, press "Record button" at the point where you
want to end the section.
But it executes record when you press "Record button" while pause and
stop.