Save - HIMS Braille Sense U2 User Manual

F3." Then, press "Backspace" until you hear the USB stick memory or
the compact flash card. Then, press "Enter" to open the memory.
The Braille Sense U2 will choose the Braille mode depending upon the
file type. For example, if you press "Enter" to select a file that has the
extensions hbl or brl, or if you type in a file name with those extensions
and press "Enter," the Braille Sense U2 will open the selected file in
Grade 2 Braille. You will not be able to change the Braille mode in these
documents. If you press "Enter" to select a file that has the extensions of
txt or doc, it will open the file in what is currently set in "View/Input
grade" of "Global options". After the file opens, you can switch the Braille
mode.
In the word processor of the Braille Sense U2, it is possible to open and
work simultaneously with up to 10 files at one time. If you already have
one document open, and you try to open another document, the Braille
Sense U2 will ask you if you want to save changes to the document that
is already open. Then, you can save the file. Once you have completed
saving the document, an open dialog box will appear. However, you will
still have the two files open. It only seems that you closed one without
saving it. With the new document open, if you want to go to the previous
document, you can press "shift-tab (Space-1-2)." If you want to go back
to the other document again, press "tab (Space-4-5)."

5.1.3 Save

The save command will save a document to a disk drive. If you want to
use this option, you can press "Space-m (dots 1-3-4)" to open the "File"
menu and execute the "Save" command by pressing "Enter" on it, or you
can press "s (dots 2-3-4)." Otherwise, you can press "Enter-s (dots 2-3-
4)" while editing a document.
If you created a new document by activating the word processor or by
pressing enter on "New" in the menu; if you execute "Save," the "Save
as dialog box" will open. You can refer to section 5.1.4 that explains how
to use the "Save as dialog box."