Restore Address List; Setting Backup Option - HIMS Braille Sense U2 User Manual

6.5.2 Restore Address List

If you want to restore the address list after a cold reset, press "Space-m
(dots 1-3-4)" or "F2" to call up the menu, and use the up and down scroll
buttons to find "Restore Address List." Then, press "Enter" on "Restore
Address List." Or, you can press "r (dots 1-2-3-5)" while you are in the
menu to find "Restore Address List." You can also press "Enter-r (dots 1-
2-3-5)" to activate this function, without calling up the menu.
If you activate the "Restore Address List" function, and you already have
an address list, you will see the message, "Address file already exists.
Which do you prefer? Append." If you press "Enter," the backup address
list will be appended to the current address list. If you press "Space-4"
once and press "Enter" on "Overwrite," you will install the new backup
file, erasing the old backup file. For example, let us assume that you
have three records in your address list and you have ten addresses in
your backup file. If you select "Append," you will have 13 records in your
address list. In this case, three addresses could possibly be redundant.
If you select "Overwrite," you will have 10 addresses backed up, and the
three original addresses will be deleted. If you don't want either
"Append" or "Overwrite," press "Space-4," locate "Cancel," and press
"Enter" on it.

6.5.3 Setting Backup Option

To backup your address list, you can do it manually using the "Backup
Address List" function. You can also backup your address list
automatically by using the "Set Backup Options." To activate the "Set
Backup Options" function, press "Space-m (dots 1-3-4)" or "F2" to open
up the menu. Then press "Space-4" or "Space-1" repeatedly to locate
"Set Backup Options." Then press "Enter" on it. Or, you can press "e
(dots 1-5)" in the menu to go to "Set Backup Options." You can also
activate the function without opening up the menu by pressing "Enter-e
(dots 1-5)."