HIMS Braille Sense U2 User Manual page 119

3) Number of copies
This option designates the number of copies to be embossed. The
default value is set to 1. You can change this number by typing in the
number that is desired. If you press "Space-4" or "Space-1," you will be
moved to "Print method" or "End page number," respectively. If you want
to move to "Confirm," press "tab ("Space-4-5")."
4) Set Braille format
In this option, you can set whether or not the Braille document layout
settings specified in Braille Sense U2 will be used when embossing. If
you set this to "Yes," the document will be embossed using the Braille
document layout setting in Braille Sense U2. If you set it to "No," the
document will be embossed in the format specified in the original
document.
5) Confirm / Cancel
In order to emboss as designated above, move to "Confirm" by pressing
"tab ("Space-4-5")," and then press "Enter." Or, if you are canceling
embossing, move to "Cancel" by pressing "tab ("Space-4-5")", and then
press "Enter."
If "Enter" is pressed on "Confirm," "Print: Yes" is displayed on the Braille
display and it is also spoken. If "Enter" is pressed on "Yes," embossing
will start. If you do not want to emboss, press "Space" to select "No," and
then press "Enter." If "Save as file" is selected by pressing "Space," then
the current document is saved as a "brl" file.
If there are any problems with the Braille printer, the Braille Sense U2
shows an error message and returns to the open document.
2. Print Text
This option is used when you want to print a document on an ink printer.
To do so, open the document to be printed and press "Space-m (dots 1-
3-4)" or "F2," and then press "Enter" on the "File" menu. Move to
"Printer" by pressing "Space-4" repeatedly. Then, press "Enter" when
you are on "Printer," or just press "p (dots 1-2-3-4)." The dialog box for