HIMS Braille Sense U2 User Manual page 264

9.3.3.2 Record
This is used to start recording. You can also start recording by pressing
the "Record" button on the front panel of the Braille Sense U2. While
recording, the Braille Sense U2 will display the "recording information"
tab. Whenever you start recording the Braille Sense U2 will create a file.
The file will be named "record01.mp3," or "record02.mp3" etc. The
recorded sound will be saved to that file. These files are stored in a
special folder. By default, these files are saved in
"/flashdisk/media/record." You can change the saving folder and
recoding file type by using the "Record Settings" option, which is
explained in section 9.3.6.3. When recording, you can pause the
recording by pressing "space 4-5" to move to the "Pause" button, and
then press "Enter." You can also pause by pressing the "record" button
on the front panel of the Braille Sense U2. If you want to resume
recording, press "Enter" on the "Continue" button, or press the "record"
button on the front panel of the Braille Sense U2 again. To stop
recording, press "Space-4-5" repeatedly on "Record" to move to the
"Stop" button, and then press "Enter."
9.3.3.3 Play
This button is used to play the file that has just been recorded. You can
also start playing the recorded sound by pressing the "play" button on
the front panel of the Braille Sense U2. If you have not yet recorded a
file after opening the "Record" dialog box, pressing "Enter" on the "Play"
button will not do anything. While playing, the "playback information" tab
will be displayed. If you want to pause or stop playing, press "Enter" after
moving to the "Pause" or "Stop" button by pressing "Space-4-5"
repeatedly.
9.3.3.4 Stop
This is used to stop recording or playing. If you press "Enter" on "Stop"
while recording, the Braille Sense U2 will stop recording and show the