HIMS Braille Sense U2 User Manual page 276

("Space-4-5")" or "shift-tab ("Space-1-2")". And you can move between
options by pressing "Space-1" or "Space-4."
The "Recoding type" allows you to set the default file type of recording
file. Its default value is set to "mp3." You can select between "wav" and
"mp3" the value by pressing "Space."
The three options are used to control the quality of recorded sound.
Higher values in "Sample rate", "Bitrate" and "Bits per channel" means a
better quality of recorded sound, as well as a larger file size of recorded
files. In other words, if you want to record high quality sound, the total
time the Braille Sense U2 can record will be shortened. On the other
hand, if you set the lower values of these options, the Braille Sense U2
can record sound longer, although the sound quality may not be as good
as when these options are set to higher values. You can change these
values by pressing "Space."
When you record the file using the line-in-cable, you must set "Line in
mode" option to "On".
The "Set folder" allows you to set the default folder where the recorded
files will be saved. Its default value is set to "/flashdisk/media/record." To
specify a different folder, press "Enter" on "Set folder," and the same
dialog box as the "Open Folder" dialog box will be displayed. Select a
folder in the same way as in the "Open Folder" dialog box.
If you save the changed settings, and exit from this dialog box, press
"Enter" after changing all of the options you want to change, or move to
the "Confirm" button, and press "Enter." If you want to cancel the
changes you made, press "Enter" on the "Cancel" button, or press
"Space-e (dots 1-5)."
9.3.6.4 Effect Settings Dialog Box
Press "Space-m (dots 1-3-4)"or "F2" in media player program, move to
"Settings" menu and press "Enter". By pressing "Space-4", move to