Lost Your Place; No Internet Connection; Email; The Braille Display Does Not Display Braille - HIMS Braille Sense U2 User Manual

22.5 Lost Your Place

1. If you have lost your place in the Braille Sense U2, and cannot
remember where you are press "F1" to access the "program" menu.
Then, press "F2-F3" to switch between programs that are open. If you
are in the word processor, pressing "space1-5-6" will give you your
current location.

22.6 No Internet Connection

1. If you are using a LAN, make sure that the Ethernet cable is
connected.
2. If you are using a modem, make sure that the phone line is connected
to the modem.
3. If you are using a DSL connection, make sure that that the Ethernet
cable is connected.

22.7 Email

1. If you are having trouble downloading email, please contact your
Internet service provider to make sure that you have the correct
POP3 and SMTP settings.

22.8 The Braille display Does Not Display Braille

1. If the Braille display does not display Braille, make sure that the
Braille display is turned on. In order to do this, press "space-o (dots 1-
3-5)," and press "space." Then, press "enter." The Braille display will
now be turned on if this option was set to off.

22.9 The Braille Sense U2 Does Not Respond

1. If the Braille Sense U2 does not respond to keystrokes or commands,
it may be necessary to reset the unit. To reset the Braille Sense U2,