HIMS Braille Sense U2 User Manual page 199

18) When you finish adding the services, press "Space-z (dots 1-3-
5-6)" to exit to the "inbox."
In order to move from a setting item (Ex: ID, password) to the previous
setting item, press "Space-1." And, in order to move to the "Confirm"
button or the "Cancel" button, press "Tab (Space-4-5)" or "Shift-Tab
(Space-1-2)."
If you made a typo in an item such as account name, ID, or password,
you can correct the type as follows;
1) In order to delete the letter where the cursor is located, press
"Space-d (dots 1-4-5)."
2) In order to delete the letter in front of the cursor position, press
"Backspace."
3) In order to delete the current line, press "Backspace-c (dots 1-4)".
Then, the Braille Sense U2 will ask "Delete line: Yes." If you press
"enter," the selected line will be deleted. If you do not want to
delete the current line, press "Space" to change from "Yes" to "No"
and press "enter."
When you need to type using computer Braille to type in your ID,
password, and address, please use the following computer Braille:
1. Dot (.""): dots 4-6
2. At sign ("@"): Press "Space-u" and release it, then press dot 4.
3. Under bar ("_"): dots 4-5-6
4. Dash ("-"): dots 3-6
8.1.2.1.1 Signature and Advanced
While adding your account, you can register signature and set advanced
options in "Advanced" menu.
1) Press "Space-M (dots 1-3-4)" to call up the menu.
2) Press "Space-4", move to "Tools".
3) Press "Enter" on the "Tools" or press "T (dots 2-3-4-5)".