Message Display Time; Language - HIMS Braille Sense U2 User Manual

then press "Enter." You can also cancel saving the setting by pressing
"Space-z (dots 1-3-5-6)" or "Space-e (dots 1-5)."
Note: If you change the Braille Code option while you are editing Braille
in the Word Processor, current written Braille would be changed to
different meanings in text. In order to avoid this situation, the Braille
Code option needs to be changed before launching the Word Processor.

3.2.6 Message Display Time

You can choose when a Braille message will disappear from the Braille
display. This setting will only work when the voice setting is set to "Off".
But "Stand by" and "Ignore" execute when the voice setting is set to "On".
The shortcut key is "m (dots 1-3-4)." The setting options that you can
choose from are "Stand by," "Ignore", and 1 to 10 seconds. The default
is "3 seconds." The "Space" key increases the option by one second and
the "Backspace" key decreases the option by one second. You can set
the unit to standby mode by pressing the "Space" key until you reach
"Stand by." In this mode, the message will remain until you press a key.
The higher value you select, the longer the message remains. If you
read the message before setting the number of seconds, you can clear
the message by pressing any key. If you choose "Ignore," then
messages will be ignored and won't show on the display. If you have
changed the setting, press "Enter" key to save the setting. You can also
"tab ("Space-4-5")" or "shift-tab ("Space-1-2")" to the "Confirm" button,
and press "Enter." If you do not want to save the setting, "tab ("Space-4-
5")" or "shift-tab ("Space-1-2")" to the "Cancel" button, and then press
"Enter." You can also cancel saving the setting by pressing "Space-z
(dots 1-3-5-6)" or "Space-e (dots 1-5)."

3.2.7 Language

The Braille Sense U2 can output speech in both US English and
Mexican Spanish. You can change the Text-to-Speech (TTS) engine
using the "Language" setting in the "Global Options".