Print Document Layout - HIMS Braille Sense U2 User Manual

press "Space." Pressing "Backspace" will allow you to move in
reverse order. When you have selected your preference, you need to
press "Space-4" in order to move to the next setting.
5. Set page numbering
This sets the position of the page number when embossing. The
selections are "Upper right" and "Lower right." The default setting is
set to "Lower right." Press "Space" in order to change the setting.
Pressing "Backspace" will allow you to move in reverse order. After
selecting your preference, you should press "Space-4" in order to
move to the next setting.
6. Header
This is used to edit the header that will be embossed on the head of
every page. Move to "Header" and type in the text to be embossed as
the header. In order to move to the next setting, press "Space-4."
7. Footer
This is used to edit the footer that will be embossed on the bottom of
every page. Move to "Footer" and type in the text to be embossed as
the footer. After you set every field, move to "Confirm" or "Cancel,"
and press "tab ("Space-4-5")." If you want to change a setting, or
check your settings again, press "Space-1" to move to the previous
fields.
8. Confirm / Cancel
In order to apply setting, when "Confirm" is displayed press "Enter". If
you do not want to change the setting, you will need to press "Enter"
when "Cancel" is displayed.

5.5.2 Print Document Layout

This option will allow you to set the layout of the document for printing on
an ink printer. Press "Space-m (dots 1-3-4)" or "F2" to call up the menu
while you are editing a document, and select "Layout" or press "l (dots 1-
2-3)" (which is the shortcut), and then select "Print Document Layout." Or,
press "Backspace-t (dots 2-3-4-5)," which is the hot key for "print
document layout." The settings in this menu are applied to all the
paragraphs in the selected document. You can navigate the menu items
with "Space-1" or "Space-4," and you can move to "Confirm" or "Cancel"