Move To Next Unread Message - HIMS Braille Sense U2 User Manual

The "Find Again" command finds the next text according to what you
found using "Find" dialog box, and it will go to the previous text if you set
the direction to "Backward" when you used the "Find" function before.
The "Find Again" function only works in the "Subject," "Date," or "From"
control.
To activate the "Find Again" function, use the following steps:
1) Press "Space-m (dots 1-3-4) or "F2" to call up the menu.
2) It shows the "File"
3) Press "Sapce-4", move to the "Edit"
4) Press "Enter" on the "Edit."
5) It shows the "Select All".
6) Press "Space-1" or "Space-4", move to "Find Again".
7) Press "Enter" on the "Find Again". Or press "g (dots 1-2-4-5)".
To activate this function without calling up the menu, press "Backspace-f
(dots 1-2-4)."

8.4.3 Move to Next Unread Message

The "Move To Next Unread Message" option allows you to move to the
next message that is unread. If you use this function on the last unread
message in a list, you will be sent to the first unread message in the list.
To activate this function while you are in the "Subject," "Date," or "From"
control,
1) Press "Space-m (dots 1-3-4) to call up the menu.
2) It shows the "Find".
3) Press "Space-4", move to the "Edit".
4) Press "Enter" on the "Edit".
5) It shows the "Select all".
6) Press "Space-4", move to the "Move to Next Unread Message".
7) Press "Enter" on the "Move to Next Unread Message". Or press "u
(dots 1-3-6).