Forwarding A Received E-Mail Message - HIMS Braille Sense U2 User Manual

If you want to add another e-mail recipient, press the "cursor routing key"
that is located at the position where you want to add the recipient, and
type in the new e-mail address. Use computer Braille when typing in this
information.
You can also save the e-mail that you are writing as a reply. It will be
saved in the "Outbox".
You can reply to an email by using "Reply To All," as well as "Reply."
Pressing "Reply" will send en e-mail to only the original sender. Pressing
"Reply To All" will send an email back to the original sender as well as all
other recipients to the original email. However, "Reply To All" will not
send an email to you, even though you were a recipient of the original
email.
To activate the "Reply To All" function,
1) Press "Space-m (dots 1-3-4)" or "F2" to call up the menu.
2) It shows the "File".
3) Press "Space-4", move to the "Message".
4) Press "Enter" on the "Message".
5) It shows the "Reply".
6) Press "Space-4", move to "Reply To All".
7) Press "Enter" on the "Reply To All". You can activate the "Reply To
All" function without calling up the menu by pressing "Backspace-r
(dots 1-2-3-5)."
8) It shows "To: (all email addresses of the original sender and the
original recipients)"
9) Then, you can use the same steps to send a message as you
would when using the "Reply" function.

8.3.3 Forwarding a Received E-Mail Message

"Forwarding" means that you will send an e-mail that you received to
another person. You can also add or edit the message and subject. You
can also attach a file to this e-mail.