Connecting Service - HIMS Braille Sense U2 User Manual

How to use "Device Name" and "Exit" in the "Bluetooth Service List"
menu are the same as how to use them in the "Bluetooth Device List"
menu.
The "Open FTP" menu item allows you to open a direct FTP connection
with a remote Bluetooth device without having to select the device and
then the service. However, you must have connected the service first
before the Braille Sense U2 will allow you to transfer files. If you have
not connected the FTP service already, and you activate this function,
you will hear, "FTP service disconnected." You can access "Open FTP"
by pressing "Space-m (dots 1-3-4)" and then "Space-1" or "Space-4" to
navigate to "Open FTP." Once you are at "Open FTP," press "Enter" to
activate it, and the Braille Sense U2 will say, "Connecting service." You
can also activate it by pressing "t (dots 2-3-4-5)" while you are in the
Bluetooth Device List menu, or by pressing "Enter-t (dots 2-3-4-5)"
without calling up the menu. This chapter will cover connecting various
Bluetooth services later in more detail.
The "Disconnect" menu item will allow you to disconnect services that
are connected to other Bluetooth devices. You can access this item by
pressing "Space-m (dots 1-3-4)" and then "Space-1" or "Space-4." Then,
press "Enter" to activate it. You can also activate this item while you are
in the Bluetooth Service List menu by pressing "d (dots 1-4-5)," or you
can activate it without calling up the menu by pressing "Enter-d (dots 1-
4-5)."
In order to disconnect any service, press "Space-1" or "Space-4" at the
Bluetooth Service List to move to the service that you want to disconnect,
and execute the "Disconnect" command.
You can disconnect the currently focused service only. This means that
you can disconnect only one service at one time. You cannot disconnect
plural services at once.
If there are no services connected to other Bluetooth devices, and you
activate this function, you will hear, "There is no service connected."

13.2.1 Connecting Service