Find Again - HIMS Braille Sense U2 User Manual

4. Confirm
After you set all of the fields and want to execute "Find," press "Enter"
on "Confirm." You can also start finding text by pressing "Enter" on
"Text to find" or "Search direction."
5. Cancel
In order to cancel the "Find" function, press "Enter" on "Cancel." Or,
you can cancel the "Find" command by pressing "Space-z (dots 1-3-
5-6)."
If you have executed the "Find" command as explained above and it
finds the text that you typed in, the sentence with the text is displayed on
the Braille display. If there was no text that matched what you typed in,
the cursor does not move and the Braille Sense U2 announce the "not
found." by the voice. This function saves the text that was typed in last,
as well as the direction, so you can use it again to search for the next
occurrence of text.
When using the find command, the current cursor position is very
important. If the cursor is located at the beginning of the document, it is
better for you to select "Forward" direction. If the cursor is located at the
end of the document, it is better to select "Backward" as the direction
used for searching.

5.3.2 Find Again

When you want to run the "Find Again" command; you can press
"Space-m (dots 1-3-4)" or "F2." Then move to "Go To" by pressing
"Space-4." Then, press "Enter" on "Go To." Move to "Find Again" by
pressing "Space-4" to move to "Find Again" and press "Enter," or press
"h (dots 1-2-5)" in the "Go To" menu. When you are editing a document,
you should press "Enter-f (dots 1-2-4)" to activate this command. When
"Find Again" is executed, "Find Again" will look for the text that was used
in the previous "Find." "Find again" will search in the same direction that
was used with the last "Find." If you have not yet used the "Find"
command in the current document, and you execute "Find Again," it will