Punctuation Level; Keyboard Echo - HIMS Braille Sense U2 User Manual

3.2.9 Punctuation Level

You can choose how you want the Braille Sense U2 to read punctuation
marks. The shortcut key is "p (dots 1-2-3-4)." The setting options are
"All," "Off," "Punctuation," and "Symbol." The default setting is set to "All"
in which the Braille Sense U2 will say all punctuation marks and symbols.
The "Space" key allows you to cycle through all four of the setting values.
If you select "Off," the Braille Sense U2 will not say any punctuation
marks. The option, "Punctuation" will make the Braille Sense U2 say
only punctuation marks, but the "Symbol" option will say all symbols
without saying punctuation marks. If you have changed the setting,
press "Enter" key to save the setting. You can also "tab ("Space-4-5")" or
"shift-tab ("Space-1-2")" to the "Confirm" button, and press "Enter." If you
do not want to save the setting, "tab ("Space-4-5")" or "shift-tab ("Space-
1-2")" to the "Cancel" button, and then press "Enter." You can also
cancel saving the setting by pressing "Space-z (dots 1-3-5-6)" or
"Space-e (dots 1-5)."

3.2.10 Keyboard Echo

With this option, you can decide how the Braille Sense U2 will speak
when you are typing. The shortcut key is "k (dots 1-3)." The setting
values are "On with characters and words," "On with characters," "On
with words," and "Off." If you select the default "On with characters and
words," you can hear each keystroke and a word right after it is
completed. If you select "On with characters," you can hear each
keystroke letter by letter. If you select the "On with words" option, you
can hear each word right after it is completed, but not each letter. You
can cycle through each of the options by pressing "Space" key. If you
have changed the setting, press "Enter" key to save the setting. You can
also "tab ("Space-4-5")" or "shift-tab ("Space-1-2")" to the "Confirm"
button, and press "Enter." If you do not want to save the setting, "tab
("Space-4-5")" or "shift-tab ("Space-1-2")" to the "Cancel" button, and
then press "Enter." You can also cancel saving the setting by pressing
"Space-z (dots 1-3-5-6)" or "Space-e (dots 1-5)."