Read Beginning Of Selected Text; Read From Beginning To Cursor; Read From Cursor To End - HIMS Braille Sense U2 User Manual

5.4.2 Read Beginning of Selected Text

The "Read Beginning Of Selected Text" command will allow you to hear
the first line of the selected text, without moving the cursor location. To
execute this command, press "Space-m (dots 1-3-4)" or "F2," and move
to the "Read" menu by pressing "Space-4." Then, press "Enter." Move to
"Read Beginning Of Selected Text" by pressing "Space-4," and then
press "Enter," or you can press "u (dots 1-3-6)" on the read menu, which
is the short cut. While editing a document, you can press "Enter-u (dots
1-3-6)" to activate this function. When you execute "Read Beginning Of
Selected Text," the cursor will stay in the same position it was at when
you executed "Read Beginning Of Selected Text."

5.4.3 Read from beginning to cursor

Using this function, the Braille Sense U2 will audibly speak a document
from the beginning to the position where the cursor is located. To
execute this command, press "Space-m (dots 1-3-4)" or "F2," and move
to the "Read" menu by pressing "Space-4." Then, press "Enter." Move to
"Read From Beginning To Cursor" by pressing "Space-4," and then
press "Enter" or you can press "t (dots 2-3-4-5)" on the read menu,
which is the short cut. While editing a document, you can press
"Backspace-g (dots 1-2-4-5)" to activate this function.
If you want to quit this function before you reach the cursor location, you
can press "Backspace-Enter." Your cursor will stay where it was when
you started this function. That is, the cursor will not move to the position
to where you stopped the function.

5.4.4 Read from Cursor to End

This command will read a document from where the cursor is located to
the end of the document. While the Braille Sense U2 is reading the text,
the cursor will stay in the same location that you were, before you
started this command. The cursor will not be moved until the reading has