HIMS Braille Sense U2 User Manual page 360

7) Type "name" here, and then press "tab (Space-4-5)."
8) Then, the "Field type" combo box will be focused. Press "Space-
4" or "Space-1" to move to "edit box," and press "tab (Space-4-5)."
9) The "Set primary key" check box will be focused. If you want to
set the current field as the primary key, press "Space" in order to
check it.
10) Press "tab (Space-4-5)" to move to the "Confirm" button, and
press "Enter." Now, the "name" field has been added to the
"addressbook" table.
If you want to cancel adding the field, press "tab (Space-4-5)" once more
to move to the "Cancel" button, and press "Enter." If you have added a
new field, you will get a message saying that a new field has been
added. Then, the "registered fields" list will be shown again. Now,
"name" field appears in the list, with the form, "name (edit box, pri) 1/1".
Since only one primary key exists in a table, if you have set a field as the
primary key, the "Set primary key" check box will not be shown in the
"Add field" dialog box when you add another field. Add the "telephone",
"address", and "memo" fields by repeating the step 5 through 10 above.
Note that you may want to set the "Field type" of "telephone" field to
"number", "address" to "edit box", and "memo" to "multi line edit box".
Once you have added all of the fields you want, press "tab (Space-4-5)"
to move to the "Confirm" button, and press "Enter."
If you need to change a name of a field that is registered, move to a field
name that you want to change on a "registered fields" list. Then press "m
(dots 1-3-4)" or "tab (Space-4-5)", and enter on a "Modify field." It
appears as "Field name: (selected filed name)", here you type the Name
you want, and press "Enter." Even though you can change a name of a
field, it is not possible to change the property of that field.
If you want to delete an already registered field, press "Space-1" or
"Space-4" repeatedly in the "registered fields" list to move to the name of
the field you want to delete. And then press "tab (Space-4-5)" repeatedly
move to "Delete field" button and press enter or press "d (dots 1-4-5),"
the shortcut key for the "Delete field" button. Or you can also press "tab