HIMS Braille Sense U2 User Manual page 347

2) After you have activated this function, you will see the disk list,
just like when you open the file manager. You will be taken to
"flashdisk" by default. However, if you have a SD card or USB
memory stick inserted, you can navigate to those disks by
pressing "Space-1" or "Space-4." Please refer to chapter 3 in this
manual regarding navigation keys in the File manager.
3) Then, select a file by pressing "Space" on the file. You can only
select files and not folders.
4) After you have selected a file, press "Space-m (dots 1-3-4)," and
then press "Space-1" or "Space-4" to move to "Send To," and
press "Enter." Or, you can press "Enter-s (dots 2-3-4)" to activate
the "Send To" function without having to call up the menu.
5) Just like copying and pasting, you will hear a sound that
indicates that the Braille Sense U2 is working. If the file is larger
than 300 KB, you will also hear the progress meter each time an
additional 10% has been completed. If the file is less than 300 KB,
then you will only hear the sound, and not the progress meter.
When the transfer has completed, you will hear, "xxx file sent,"
where xxx is the name of the file. If the file does not transfer, you
will hear, "xxx file not sent." Once all of the files have been
transferred completely, you will hear, "Successfully sent," and you
will be returned to the remote folder list.
13.2.3.3 Retrieve File
The "Retrieve File" function will allow you to retrieve a file from the
remote folder list, and move it to the local folder. This function is
available while in the remote folder list. You can only save files to the
"flashdisk/download" folder with this function. Perform the following steps
to activate the "Retrieve File" function:
1) After you have connected the FTP service, you will be
connected to the remote folder list. You can navigate through the
list using the same commands as in the File manager. You can
reference these commands by referring to chapter 3 of this manual.
2) Select the file that you want to retrieve by pressing "Space" on it.
Note that you cannot select folders.