Adding A Schedule - HIMS Braille Sense U2 User Manual

start talking about using the "Schedule manager" in this section, we
should explain how to enter the date and time. When you are asked to
enter a date and time, you can either type in the date and time, or select
it using shortcut keys, which are outlined at the end of this section.
When you type numbers in date/time, you can use either computer
Braille (without a number sign) or regular grade 1 Braille (with or without
a number sign). When entering time, use "hh mm" format, two digits for
the hour, and two digits for the minute. For example, use "10 05" to enter
5 minutes past 10. You can use a dash (-) or slash (/) to separate the
hour field and minute field, but not a colon (:). You can enter a date in
"mm dd yyyy" format, which uses two digits for the month, two digits for
the day, and four digits for the year, as in "09 01 2004" to enter
September 01, 2004. Again, you can use a space, dash (-), or slash (/)
to separate the month, day, and year. If you want to change AM/PM,
press Space-x (dots 1-3-4-6). To set the date and time with shortcut
keys, you can use the following commands.
1. Date setting keys
Move to the next day: Space-6
Move to the previous day: Space-3
Move to the next week: Space-5
Move to the previous week: Space-2
Move to the next month: Space-4
Move to the previous month: Space-1
Move to the next year: Space-5-6
Move to the previous year: Space-2-3
2. Time setting keys
Move to 1 hour after: Space-4
Move to 1 hour before: Space-1
Move to 10 minutes after: Space-5
Move to 10 minutes before: Space-2
Move to 1 minute after: Space-6
Move to 1 minute before: Space-3

7.4 Adding a Schedule