Ppp Protocol Configuration; Auth-User-Group - Zte ZXR10 Command Manual

Function
Command Mode
Syntax
Syntax
Description
Instruction
Related Command
3
C h a p t e r
PPP Protocol
Configuration
Table of Contents
auth-user-group ................................................................11
multilink-group .................................................................12
ppp authentication.............................................................12
ppp authentication mode ....................................................13
ppp authentication server ...................................................14
ppp chap hostname ...........................................................14
ppp chap password ............................................................14
ppp local ..........................................................................15
ppp multilink endpoint........................................................15
ppp open..........................................................................16
ppp pap sent-user name.....................................................16
ppp remote.......................................................................17
ppp timeout......................................................................17
show ppp multilink ............................................................18

auth-user-group

Use this command to specify a user group through which users
accessing from an interface. Delete the user group with the no
form of this command.
Interface configuration
auth-user-group [default | special <usergroup-name>]
no auth-user-group
default
special
<usergroup-name>
This command without the parameters specifies the public user
group by default.
user-group
Confidential and Proprietary Information of ZTE CORPORATION
Specifies to configure the public user group
Specifies to configure the private user group
Name of private user group
11