Show Vlan Private-Map - Zte ZXR10 Command Manual

Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
All information about the VLAN is displayed if this command has
no parameter.
� This example describes how to display all information about
the VLAN.
ZXR10#show vlan
VLAN Name Status Said MTU IfIndex PvidPorts UntagPorts TagPorts
1 v1 active
� This example describes how to display major information about
a VLAN.
ZXR10#show vlan brief
VLAN Name Status PvidPorts
1 v1 active fei_1/1
The displayed field descriptions are shown below.
Field
VLAN
Name
PvidPorts
UntagPorts
TagPorts

show vlan private-map

Use this command to display information about the configuration
of the private VLAN.
All modes except user EXEC
show vlan private-map [<session id>]
<session id>
If there is no parameter after this command, information about
the configuration of isolate/promicuous ports of all sessions is dis-
played.
� This example describes how to display information about the
configuration of all private VLANs.
ZXR10#show vlan private-map
Session_id Isolate_Ports
-----------------------------------------
1 fei_1/1
2 fei_1/2
� This example describes how to display information about the
configuration of a private VLAN.
ZXR10#show vlan private-map 1
Session_id Isolate_Ports
-----------------------------------------
1 fei_1/1
The displayed field descriptions are displayed as follows.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 VLAN Configuration
1400 1 fei_1/1
UntagPorts TagPorts
fei_1/2"
Description
VLAN ID
VLAN name
Port whose PVID is the specified VLAN
untag port of the VLAN
tag port of the VLAN
Session ID of the designated PVLAN
Promis_Ports
fei_2/1
fei_2/2
Promis_Ports
fei_2/1
fei_1/2
25