Debug Ip Bgp Updates; Debug Ip Destination; Debug Ip Dhcp - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume III)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Related
Commands
Purpose
Command Modes
66 Confidential and Proprietary Information of ZTE CORPORATION
terminal monitor

debug ip bgp updates

Use this command to trace and display the updates message
sent/received by the BGP connection and show the route pro-
cessing conditions in the message. Close the tracing with the no
command.
Privileged EXEC
debug ip bgp [<ip-address>] updates
no debug ip bgp [<ip-address>] updates
<ip-address>
terminal monitor

debug ip destination

Use this command to enable debug function of the specified des-
tination address IP protocol to display the debugging information
processed by the IP protocol, and display whether the router is
sending/receiving the specified destination address IP message.
Disable the function with the no command.
Privileged EXEC
debug ip destination <ip-address>
no debug ip destination <ip-address>
<ip-address>
terminal monitor

debug ip dhcp

Use this command to enable the debug function of the DHCP RE-
LAY and DHCP SERVER. Disable the debug function with the no
command.
Privileged EXEC
Neighbor IP address. When a neighbor is
specified, only the updates message related
to this neighbor will be traced.
Destination IP address in the dotted decimal
notation