Table 14 The Relay Dhcp Parameter - Zte ZXHN H108L Maintenance Manual

ZXHN H108L Wireless ADSL Router Maintenance Manual
Parameter
Radvd Enable
Radvd Mode
Auto Prefix
DHCP6 Server
DHCP6 Mode
A DHCP relay is a computer that forwards DHCP data between
computers that request IP address and the DHCP server that assigns
the IP address. If the DHCP Relay option is enabled, DHCP requests
from local PCs will be forwarded to the DHCP server that runs on
WAN side. For this function working properly, ZXHN H108L must run
on the router mode, disable the DHCP server on the LAN port and
make sure the routing table has the correct routing entry.
If relay DHCP is selected, Figure 13 will be display on the web
configuration page. Table 14 describes the parameter.
F 1 3 T R
I G U R E H E
T 1 4 T R
A B L E H E
Parameter
26 Confidential and Proprietary Information of ZTE CORPORATION
Description
modem allocate prefix of IPv6 address to PC. Usually, it
select Enable. or the PC connected to this Modem can't
access internet
Usually enable，if disabled, modem can't get correct IPv6 address;
So Disabled it if user doesn't want to use IPv6 function
The way of modem to get IPv6 address prefix
PC get complete IPv6 address from internet, not combine to
modem.
DHCPv6 Server allocate IPv6 address to modem auto, or user
config one
D H C P W
E L A Y E B
D H C P P
E L A Y A R A M E T E R
Description
C
O N F I G U R A T I O N
P
A G E