Work-Mode - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume III)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
42 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10(config)#line 2
ZXR10(line_config)#transport input telnet

work-mode

Use this command to set the work mode of the serial port.
Interface configuration
work-mode {transmit | com}
transmit
com
� It is applied to GAR project at present only.
� This command can be configured on high-speed asynchronous
serial port.
This example describes how to set the work mode is serial mode.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#work-mode com
Sets the serial port to ordinary forward port.
Sets the serial port to serial port
communication.