9.
OTHER FUNCTIONS
Transmitting the DTMF code
DSelecting the DTMF transmit speed
1. Display the DTMF screen.
» DTMF
2. Touch [SET].
3. Touch "DTMF Speed."
4. Touch the option to set. (Example: 300ms)
• 100ms: Transmits the DTMF tones at about 100
milliseconds per code (5 characters per
second).
• 200ms: Transmits the DTMF tones at about 200
milliseconds per code (2.5 characters
per second).
• 300ms: Transmits the DTMF tones at about 300
milliseconds per code (1.6 characters
per second).
• 500ms: Transmits the DTMF tones at about 500
milliseconds per code (1 character per
second).
5. To close the DTMF SET screen, push
Home Channel function
Home Channels are often-used frequencies you
can be preset in the transceiver's VFO mode,
Memory mode, and DR screen.
DHome Channel setting
Example: In the VFO mode
1. Select a mode (VFO or Memory) or the DR
screen in which you want to set the Home
Channel.
2. Select a frequency, channel, or a repeater to
be set as the Home Channel.
LOn the DR screen, select "FROM."
3. Push
4. Touch "Home CH Set."
5. Touch "Set Frequency."
LIn the Memory mode, touch "Set Channel." On
the DR screen, touch "Set Repeater."
TIP: Touching "Clear" in Step 4 clears the Home
Channel setting.
DHome CH Beep function
When the set Home Channel is selected, a beep
sounds. You can confirm the Home Channel
selection without looking at the display.
LYou can turn OFF the Home CH Beep function.
» SET > Function > Home CH Beep
.
Share Pictures function
With this function, you can send a picture and
view a received picture, even if you do not use
the software application.
LSee "About the Share Pictures function" that can be
downloaded from the Icom website.
9-7
.