Home Channel Function; D Setting A Home Channel - Icom ID-52A Basic Manual

■ Home Channel function

You can set an often-used frequency, Memory channel,
or repeater as a Home Channel in VFO mode, Memory
mode, and DR screen. When a Home CH is selected by
rotating [DIAL], a beep sounds. You will know the Home
CH selection without looking at the display.

D Setting a Home Channel

1. Select the VFO or Memory mode, or the DR screen to
set a Home Channel. (p. 14)
2. Select a frequency, Memory channel, or an access
repeater to be set as a Home Channel. (p. 16)
3. Push [QUICK].
4. Select "Home CH Set."
5. Select "Set Frequency" (VFO mode), "Set Channel"
(Memory mode), or "Set Repeater" (DR screen).
• Sets a Home Channel, then returns to the standby
screen.
BASIC OPERATION
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
18