Call Sign Items - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN

Call Sign items

Call Sign
MENU > Call Sign
Set or view the "UR," "R1," "R2," and "MY" call signs
to use in the DV mode�
When not using the DR function, sets the call signs on
this screen�
For Simplex operation (DV mode)
You can set the "UR" and "MY" call signs�
For Duplex (repeater) operation
(DV mode/DR function)
You can set only "MY" call sign when the DR function
is ON�
<To manually set the Duplex (repeater) operation>
Example: Making a gateway CQ call to Kirkland (IA)
repeater (N71H B) from the Hirano repeater
(JP3YHH A), in the DV mode�
L Before starting to set the call sign, set the
frequency of your Access repeater and duplex
direction on the standby screen� (Section 4)
TIP: When the Digital Repeater Set function is
ON, the repeater call sign is automatically set�
(p� 11-26)
Step 1. Setting the call sign "R1"
1� Select "R1�"
2� Push [QUICK]�
3� Select "Edit�"
4� Rotate [DIAL] to enter the first character�
L Selectable characters are Alphanumeric characters
and symbol ("/")�
5� Push [CD] or [CS] to move the cursor�
6� Repeat steps 4 and 5 to enter the repeater call
sign of up to 8 characters, including a space�
7� After entering, push [ENT]�
• Sets the entered repeater call sign�
(Example: JP3YHH A)
11-19
Step 2. Gateway "R2" setting
1� Select "R2�"
L To manually enter a call sign, push [QUICK], then
select "Edit�"
2� Select "GW�"
About the RPT2 SELECT screen
NOT USED* For local area calls
To select the gateway call sign from
GW
the repeater list
Repeater To select the repeater that has the
name same gateway as the "R1" repeater�
Step 3. Destination "UR" setting
1� Select "UR�"
L To manually enter the call sign, push [QUICK], then
select "Edit�"
2� Select "Gateway CQ�"
3� Select repeater group where your destination
repeater is listed�
4� Select a destination repeater�
About the YOUR SELECT screen
To select "CQCQCQ" to make a non-
CQCQCQ
call sign specific call.
To select "Gateway CQ" to make a
Gateway CQ*
call using the repeater list�
To select the destination "UR"
Your Call
call sign using the Your Call Sign
Sign
memory�
To select the destination "UR" call
RX History
sign using the RX History�
To select the destination "UR" call
TX History
sign using the TX History�
* Not displayed in the Simplex mode�
(Example: 19: USA West)
(Example: Kirkland (IA))