Menu Items And Default Settings - Icom ID-5100A Basic Manual

■ Menu items and Default settings

NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
DUP/TONE...
Offset Freq
Repeater Tone
TSQL Freq
Tone Burst
DTCS Code
DTCS Polarity
Digital Code
Manage Memory
Memory CH
Call CH
* 1 The default value may differ, depending on the frequency band (selected as the MAIN band before entering the Menu screen) and the
transceiver version.
* 2 The default value may differ, depending on the transceiver version.
Settings to access repeaters.
0.000~0.600.00* 1 ~59.995 MHz
67.0~88.5~254.1 Hz
67.0~88.5~254.1 Hz
OFF or ON
023~754
Both N, TN-RR, TR-RN or Both R
00~99
Manage your Memory or Call channel data.
ALL, A~Z
C0/C1(144):146.010 FM* 2
C0/C1(430):440.000 FM* 2
MENU SCREEN
Sets the frequency offset for duplex (repeater) op-
eration.
Selects a tone frequency used to access the repeat-
ers.
Selects a tone frequency for the Tone squelch or the
pocket beep function.
Turns the Tone Burst function ON or OFF.
This function is used to suppress the squelch tail noise
heard from the transceiver's speaker.
Selects a DTCS (both encoder/decoder) code for
DTCS squelch or the pocket beep function.
Selects the DTCS polarity for the DTCS squelch or
the pocket beep function.
Selects a digital code for the Digital Code squelch
function.
Manages for the Memory channels.
Manages for the Call channels.
7
7
62 62