Alarm Relay and Ground
The alarm relay output contacts are in the middle of the DC terminal block connector as shown in the
figure below.
The alarm relay out is "Normal Open", and it will be closed when detected any predefined failure such
as power failures or Ethernet link failures.
The relay output with current carrying capacity of 0.5 A @ 24 VDC
Console Connection
The Console port is for local management by using a terminal emulator or a computer with terminal
emulation software.
● DB9 connector connect to computer COM port
● Baud rate: 115200bps
● 8 data bits, 1 stop bit
● None Priority
● None flow control
10
ECIS4500 Quick Installation Guide
Ground Connector