SP descriptions
• SP5-875-001 (SC automatic reboot: Reboot Setting)
Enables or disables the automatic reboot function when an SC error occurs.
0: The machine reboots automatically when the machine issues an SC error and logs the SC error
code. If the same SC occurs again, the machine does not reboot.
1: The machine does not reboot when an SC error occurs.
The reboot is not executed for the pattern A or C.
SC Logging
When an SC is generated, the "total count value when the SC is generated" and the "SC code" are
logged. However, if the total count value during the SC is the same as last time, logging is not
performed.
Logged data can be checked by outputting an administrative report (SMC print). The SC history is
logged up to the last 10 entries, and if there are more than 10 entries, data are progressively deleted
starting from the oldest.
List of Automatic Reboot Target SC
Engine SC
Automatic reboot target SC is as follows. For details of Automatic reboot, refer to page 747 "SC
Automatic Reboot".
SC code
101-01
Lamp Error (Scanning)
101-02
Lamp Error (LED illumination adjustment)
102-00
LED Illumination Adjustment Error
120-00
Scanner Home Position Error 1
121-00
Scanner Home Position Error 2
141-00
Black level detection error
142-00
White level detection error
144-00
SBU Communication Error
Name
Service Call Conditions
757