Update Process - Ricoh MP C2504 Field Service Manual

No.
5 While scanning (copy, scanner, fax)
6 Retrieving image data via network
7 While initial setting (User Tools settings) or SP is being set
8 While fax is transferring data
9 During on hook / on handset
10 During the PC-FAX process (from PC to machine data transfer to the end of the job)
11 While shifting to/from the energy server mode
When not being able to run firmware update due to the modules that are running
12
e.g.) Waiting for DCS transfer (refer to appendix), accessing devices such as HDD/SD card,
etc.
13 While displaying a preview
14 While the document server function is in use
15 Connecting to TWAIN
16 During the interrupt copy process
17 While displaying the printer menu
While updating the display for the document server function via WIM or for stored fax
18
documents
19 While writing log information
20 While accessing the address book
21 During SC

Update Process

When the machine has decided to run the auto firmware update, the following message is displayed.
Firmware Update (Auto Remote Firmware Update)
Situations judged as machine in use
705