5. System Maintenance
3. After machine servicing is completed:
• Change SP5-169 from "1" to "0".
• Turn OFF then ON the machine power. Tell the administrator that you have completed
servicing the machine.
• The Administrator will then set the "Service Mode Lock" to ON.
Remarks
The maximum number of characters which can show on the control panel screen is limited to 30
characters. For this reason, some of the SP modes shown on the screen need to be abbreviated. The
following are abbreviations used for the SP modes for which the full description is over 20 characters.
Item
Paper Weight
Paper Type
Paper Feed Station
Print Mode
Others
The settings of each SP mode are explained in the right-hand column of the SP table in the following
way.
[Adjustable range / Default setting / Step] Alphanumeric
670
2
Thin paper: 52-59 g/m
, 14-15lb. Bond
Plain Paper1: 60-74 g/m
Plain Paper2: 75-81 g/m
Middle Thick: 82-105 g/m
Thick Paper1: 106-169 g/m
Thick Paper2: 170-220 g/m
Thick Paper3: 221-256 g/m
Thick Paper4: 257-300 g/m
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
P: Paper tray
B: Bypass tray
S: Simplex
D: Duplex
Description
2
, 16-20lb. Bond
2
, 20lb. Bond
2
, 20-28lb. Bond
2
, 28lb. Bond-90lb. Index
2
, 65-80lb. Cover
2
, 80lb. Cover-140lb. Index
2
, 140lb. Index-110lb. Cover