Reverse Sensor: Late Jam: Cause Code 024 - Ricoh MP C2504 Field Service Manual

6. Troubleshooting
Check if the paper thickness and size are detected correctly.

Reverse Sensor: Late Jam: Cause Code 024

Target Part/SP No.:Reverse Sensor / SP5-803-009 (Inverter Sensor)
Execute an INPUT check when there is no paper at the position
of the referenced sensor.
Execute an INPUT check when there is paper at the position of
the referenced sensor.
Solution:
• Clean the sensor.
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
Target Part/SP No.: Reverse Motor / SP5-804-047 (Inverter Motor:CW:Standard Speed)
Turn the referenced motor OFF with OUTPUT check
Turn the referenced motor ON with OUTPUT check
Solution:
• Reconnect the connector.
• Replace the motor.
• Replace the Paper Transport IOB.
• Replace the harness.
Target Part/SP No.:Paper Exit Solenoid / SP5-804-004 (Exit Junction Solenoid)
Turn the referenced solenoid OFF with OUTPUT check
Turn the referenced solenoid ON with OUTPUT check
1026
Cause verification
Cause verification
Cause verification
Set the paper thickness and size to the
correct value.
Problem Judgement
0 :Paper detected
1: Paper not detected
Problem Judgement
Drive sound heard
Drive sound not heard
Problem Judgement
Drive sound heard
Drive sound not heard