Result Code For Executing Process Control - Ricoh MP C2504 Field Service Manual

Process Control
Initial Developer
7 Setting Process
Control

Result Code for Executing Process Control

Check the following SPs.
• SP3-012-001 to 010 (Front)
• SP3-012-011 to 020 (Center)
• SP3-012-021 to 030 (Rear)
Category Code
00 and larger 00
10 and larger
11
Result (Normal)
41
42
40 and larger
43
ID Sensor
44
Operative Condition
When the machine detects a new PCU or
development unit
Result name
Not executed
Succeeded
ID sensor output error (Max)
ID sensor output error (Min)
ID Sensor error (Max)
ID Sensor error (Min)
Related SPs
-
Description
Factory default setting (SP default)
-
Vt > Max
Vt < Min
Development gamma is in target, but
Vt value is less than upper limit.
Development gamma is in target, but
Vt value is less than lower limit.
Process Control
1121