Paper End Detection - Ricoh MP C2504 Field Service Manual

There are the following 4 remaining paper detection levels:
Remaining paper status
Remaining paper status sensor 1
Remaining paper status sensor 2
Control panel remaining paper display

Paper End Detection

When there is no more paper in the paper feed tray, the leading edge of the paper end feeler falls into
a notch in the base plate, and the paper end sensor at the rear edge of the end filler switches ON
(pass).
100% 70%
ON OFF
ON ON
Bar 4 Bar 3
Paper Feed/ Transport Section
30% 10%
OFF ON
OFF OFF
Bar 2 Bar 1
1167