Operation Check Procedures Of The Toner Supply Motor/Toner Bottle Drive Motor - Ricoh MP C2504 Field Service Manual

SP No.
SP1-153-003 Abnormal Noise
Confirmation: Operation
Line Speed
SP1-153-004 Abnormal Noise
Confirmation: Operation
Time
SP1-153-005 Abnormal Noise
Confirmation: Heat
Center Target Temp
SP1-153-006 Abnormal Noise
Confirmation: Heat End
Target Temp
SP1-153-007 Abnormal Noise
Confirmation: Press
Target Temp
Operation Check Procedures of the Toner Supply Motor/Toner Bottle Drive
Motor
The operation check of the toner supply motor and/or toner bottle drive motor, is performed by a forced
toner supply, not OUTPUT Check.
• Operation other than the following procedures may occur the abnormal density, toner scattering,
scumming, and cleaning failure at the image transfer unit.
1. Do [Force Tnr Supply :Exe (SP3-050-003 to 006)] for the applicable color twice. If there is
enough toner in the toner supply unit, the toner bottle drive motor will not work.
SP No.
SP3-050-003
SP3-050-004
SP3-050-005
SP Name
Line speed at the time of
rotation
0: Standard speed
1: Middle speed
2: Low speed
Rotates during this time. Initial
value: 60 sec.
Temperature setting for
SP1-153-001 (Unit: Execute)
Temperature setting for
SP1-153-001 (Unit: Execute)
Temperature setting for
SP1-153-001 (Unit: Execute)
SP Name
Force Tnr Supply :Exe Execute: K
Force Tnr Supply :Exe Execute: C
Force Tnr Supply :Exe Execute: M
When Abnormal Noise Occurs
Function
Do not change
Description
995