Fusing Exit Guide Plate; Cleaning The Fusing Entrance Guide Plate - Ricoh MP C2504 Field Service Manual

• Fasten the screw in the marked screw hole [C].

Cleaning the Fusing Entrance Guide Plate

Carefully remove adhering toner as shown in the diagram below with a dry cloth. Then, wipe with a
cloth moistened with alcohol.

Fusing Exit Guide Plate

1. Fusing unit (page 541)
2. Fusing upper cover
3. Fusing exit guide plate [A]
Remove the clip ring, and then slide this part to the right to remove it.
(page 544)
Fusing Unit
543