Sp5-816-208 Error Codes - Ricoh MP C2504 Field Service Manual

2. Installation
Value
9 Request number confirmation executing
11 Already registered
12 Parameter error
20 Dial-up authentication error
21 Answer tone detection error
22 Carrier detection error
23 Invalid setting value (modem)
24 Low power supply current
25 unplugged modem
26 Busy line
8. Exit the SP mode.

SP5-816-208 Error Codes

Caused by Operation Error, Incorrect Setting
Code
Inquiry, registration attempted without
-12002
acquiring Request No.
Attempted registration without execution of a
-12003
confirmation and no previous registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
@Remote communication is prohibited. The
-12005 device has an Embedded RC gate-related
problem.
A confirmation request was made after the
-12006
confirmation had been already completed.
The request number used at registration was
-12007
different from the one used at confirmation.
370
Meaning
Meaning
Solution/ Workaround
Processing... Please wait.
-
-
* These errors occur only in the modems
that support @Remote.
Solution/ Workaround
Obtain a Request Number before
attempting the Inquiry or Registration.
Perform Confirmation before attempting
the Registration.
Check ID2 of the mainframe.
Make sure that "Remote Service" in User
Tools is set to "Do not prohibit".
Execute registration.
Check Request No.