Undo Exec - Ricoh MP C2504 Field Service Manual

2. Installation
6. When merge is complete, and the following screen is displayed, press [CLOSE].
• If the process is terminated abnormally, perform the merge in SP mode again.
• If the capacity of the destination SD card is insufficient, the merge operation cannot be
performed.
7. Press [END] twice.
8. Turn OFF the main power.
9. Remove the empty SD card after transfer from Slot 2.
10. Reattach the slot cover (
11. Turn ON the main power, output the system setting list, and check that the options are
recognized correctly.

Undo Exec

"Undo Exec" (SP5-873-002) lets you move back application programs from an SD card in Slot 1
(upper) to the original SD card in Slot 2 (lower). You can use this program when, for example, you have
mistakenly copied some programs by using "Move Exec".
1. Turn OFF the main power.
2. Remove the SD card slot cover [A] (
350
×1).
×1).