Ricoh Aficio MP 5500 S/P How To Do

Change default file type when scanning

Hide thumbs Also See for Aficio MP 5500 S/P:

Download this manual See also: Scanner Reference, Function Manual

How to change the default File Type in Scanner Mode

Details

How do I change the default File Type in Scanner Mode?

Answer

1. Press the [Scanner] mode key on the left side of the Operation Panel.

2. Select [File Name/Type]

3. Select the File Type you want to be the default file type [Single Page] or [Multi Page] TIFF/JPEG, PDF, or TIFF

4. Press [OK]

The following settings can also be registered as defaults: Scan Settings, 1 Sided /2

Note:

Sided

Original, Top to Top/Top to Bottom, skip scanning back side of the last page, Divide, Original Orientation, Batch /

SADF, Stamp, Store File, Preview, and Reception Notice.

5. Press the [Program] key

6. Press [Program as Defaults]

7. Press [Program]

Page 1 How to change the default File Type in Scanner Mode Details How do I change the default File Type in Scanner Mode? Answer 1. Press the [Scanner] mode key on the left side of the Operation Panel. 2. Select [File Name/Type] 3.
Page 2 9. Press [Simplified Display] key and repeat steps 1 - 8 if you want the Simplified Display Mode to have the same defaults. Products Category How to Ricoh Programming/Operation Black & White Multifunction User Programming Aficio MP 5500, 6500, 7500...