6. Troubleshooting
SC Code Descriptions
SC1xx: Scanning
SC No.
101-01
196
Level
Error Name/Error Condition/Major Cause/Solution
B
Lamp error (scanning)
The white level peak did not reach the prescribed threshold when the
white plate was scanned.
• CIS defective
• MPU defective
• Harness defective
• Condensation in the scanner unit
• CIS dirty or positioned incorrectly
• White plate dirty or positioned incorrectly
1. Perform the following operations.
• Reconnect the harness of the CIS.
• Reattach or clean the CIS.
• Reattach or clean the white plate.
2. Replace the following parts.
• Replace the CIS.
• Replace the MPU.
• Replace the harness of the CIS.