Configuring "Auto Erase Memory" (Performed By The Customer) - Ricoh MP C2504 Field Service Manual

8. Set SP5-836-001 (Capture Function (0:Off 1:On)) to a value of 0 (disable).
9. Execute SP5-878-001 ([Option Setup: Data Overwrite Security)
If the installation fails, "Installation failed" is displayed when this SP is executed.
10. Print out the System Settings List and make sure that the option was installed successfully.
11. Reconnect the network cable.
12. Execute SP5-990-005 (SP print mode Diagnostic Report).
Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the
latest settings may not be collected when the SMC is printed.
13. Make sure that ROM number "D3BC5757A" and firmware version "1.02" appear in both
of the following areas on the report (they must match):
• "ROM Number / Firmware Version" - "HDD Format Option"
• "Loading Program"

Configuring "Auto Erase Memory" (Performed by the Customer)

1. Press the [User Tools] icon.
2. Press [Machine Features].
3. Press [System Settings].
4. Press [Administrator Tools].
5. Press [Next] three times.
6. Press [Auto Erase Memory Setting].
7. Press [On].
DataOverwriteSecurity Unit Type M19 (D3BS-03)
365