4. Replacement and Adjustment
Waste Toner
Waste Toner Bottle
Before Replacing the Waste Toner Bottle
When the bottle is replaced after the machine detects that the waste toner bottle is full and stops, the
counter for the Waste Toner Bottle is reset automatically.
When the bottle is replaced before the machine stops due to a full bottle, it is necessary to reset the PM
counter manually (set SP3-701-142 to "1" before replacing the bottle, then switch the power off).
SP3-701 (Manual New Unit Set)
This SP is the new unit detection flag.
0: new unit detection flag OFF, 1: new unit detection flag ON
Waste toner bottle
Replacement
1.
Open the waste toner cover [A].
472
Item
SP
SP3-701-142