Removing Power From The Server - Oracle SPARC T7-1 Service Manual

Removing Power From the Server

The following table identifies the components in each category.
Component service
Category
Hot-service, replaceable by
customer
Cold-service, replaceable
by customer
Cold-service, replaceable
by authorized service
personnel
Related Information
"Internal Component Locations" on page 16
■
Removing Power From the Server
These topics describe how to power off the server.
46 SPARC T7-1 Server Service Manual • May 2017
Component Service information
Drive "Servicing Drives" on page 61
Drive filler "Servicing Drives" on page 61
Power supply "Servicing Power Supplies" on page 83
Fan "Servicing Fan Modules" on page 73
Memory risers and "Servicing Memory Risers and
DIMMs DIMMs" on page 89
PCIe cards "Servicing PCIe Cards" on page 113
Battery "Servicing the Battery" on page 125
SPM "Servicing the SPM" on page 131
SC PROM "Servicing the Motherboard" on page 147
eUSB Drive
Motherboard "Servicing the Motherboard" on page 147
Drive backplane "Servicing the Drive
Backplane" on page 165
DVD drive "Servicing the DVD Drive" on page 139
LED indicator modules
(front left and front right)
Notes
Drive must be offline.
Needed to preserve proper
interior air flow.
Hot-service if two power
supplies are in use. Otherwise,
cold-service.
Removal of a fan requires
replacement within 5 minutes
to avoid overheating.
Transfer system configuration
PROM to new motherboard.
Remove any media prior to
replacement.
A drive must be installed to
preserve proper interior air
flow.