Removing Power From The Server - Oracle SPARC T5-2 Service Manual

Removing Power From the Server

The following table identifies the components in each category.
Component service
Category
Hot-service, replaceable by
customer
Cold-service, replaceable
by customer
Cold-service, replaceable
by authorized service
personnel
Related Information
"Component Task Reference" on page 28
■
Removing Power From the Server
Step
1.
58 SPARC T5-2 Server Service Manual • February 2017
Component Service information
Drive "Servicing Drives" on page 69
Drive filler "Servicing Drives" on page 69
Power supply "Servicing Power Supplies" on page 89
Fan module "Servicing Fan Modules" on page 81
Memory risers and "Servicing Memory Risers and
DIMMs DIMMs" on page 97
DVD drive "Servicing the DVD Drive" on page 113
System battery "Servicing the Battery" on page 117
I/O cards "Servicing PCIe Cards" on page 121
Fan board "Servicing the Fan Board" on page 135
Motherboard "Servicing the Motherboard" on page 141
Drive backplane "Servicing the Drive
Backplane" on page 157
PS backplane "Servicing the PS Backplane" on page 163
Description
Prepare the server for powering off.
Notes
Drive must be offline.
Needed to preserve proper
interior air flow.
If two power supplies are in
use. Otherwise, cold service.
Removal of a fan in the rear
row requires replacement
within 30 seconds to avoid
overheating
Remove any media prior to
replacement.
A drive must be installed to
preserve proper interior air
flow.
Transfer system configuration
PROM to new motherboard.
Links
"Prepare to Power Off the Server" on page 59