Show Tech-Support Ppp - Cisco ASR 9000 Series Command Reference Manual

show tech-support ppp

show tech-support ppp
To automatically run show commands that display information specific to Point to Point Protocol (PPP)
debugging, use the show tech-support ppp command in EXEC mode.
show tech-support ppp [file send-to] [background] [compressed| uncompressed] [interface type instance]
[location node-id| all] [rack]
Syntax Description
file
send-to
background
compressed
uncompressed
interface
type
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
202
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Collects information about a specific interface.
Interface type. For more information, use the question mark (?) online help function.
Tech-Support Commands