Mitsubishi Electric QD77MS User Manual page 80

[Cd.324] Connection command of synchronous encoder via CPU
Use this data when "201: Synchronous encoder via CPU" is set in "[Pr.320] Synchronous
encoder axis type".
If set to"1", the synchronous encoder axis is connected. Once connected, the synchronous
encoder current value is restored based on the "[Cd.325] Input value for synchronous
encoder via CPU".
If set to "0", the synchronous encoder axis is disconnected.
[Cd.325] Input value for synchronous encoder via CPU
Use this data when "201: Synchronous encoder via CPU" is set in "[Pr.320] Synchronous
encoder axis type".
Set a value to be used every time as the input value for the synchronous encoder in
encoder pulse units.
If 1 or more is set in "[Pr.329] Resolution of synchronous encoder via CPU", it is processed
as a cycle counter within the range from 0 to (resolution of synchronous encoder via CPU -
1).
2 - 32
Chapter 2 Input Axis Module