4 Machine
4.2.7.1
Workpiece and program selection with the data selector
Operating
sequence
4-48
The data selector can be used to access the workpiece data on the hard disk or
data on another computer in the network from the NCK area Machine.
Press the softkey SELECT PROG./JOB in the automatic basic display. The
"data selector" appears in the basic display for Automatic.
Note
When selected first, the data selector displays automatically the workpiece
directory LOCAL.
If you want to deselect another workpiece directory, select the root directory
first.
For this, position the selection cursor by means of theARROW keys on the
entry (..)
Press the INPUT key. The workpiece directories in the root of the data selector
are displayed.
Fig. 4-24 Data selector
The following directories are displayed in the data selector:
• The root directory is USER. It always contains the subdirectories LOCAL
and NCK.
6FC5198-6AA60-0BP1
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99