CHANGING DEFAULT SETTINGS (SERVICE
Printing needs may vary. To suit your applications, you can adjust the
settings for certain functions.
How To Access Service Programs
The service programs can be set by following this procedure.
If you want to change the settings of a selected service program,
95.
For the service program menu,
Press the SP mode key.
1
The SP-mode menu appears on the
guidance display.
Using the Number keys, enter
2
the desired service program num-
ber (SP No.).
For the SP No.,
102 ~ 107.
You can go back a menu or move on
using the "<" and ">" keys.
When you want to leave the
3
Service Program mode, press the
Clear Modes key.
CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
PROGRAM MODE)
see pages 102 ~ 107.
refer to pages
see page
94