Alignment Brush Roller Replacement - Ricoh A193 Service Manual

6.2 ALIGNMENT BRUSH ROLLER REPLACEMENT

[A]
[C]
1. Remove the front and rear covers.
2. Pull out the jogger unit
3. Remove the E-ring [A], slide off the pulley [B], then remove 2 bushings
[C].
NOTE: When reinstalling, the metal bushing goes at the front side.
4. Remove the alignment brush roller assembly [D].
(A666)
REPLACEMENT AND ADJUSTMENT
[D]
12-25
[A]
[B]
[C]
SM